ОПМ 108002 Кольцо стопорное BHO эксцентрическое осевое внутреннее (дюймовое)

Характеристики

Материал: Steel (сталь)

Покрытие: без покрытия

Материал

Покрытие

Диаметр

Название	В упаковке	Цена	Количество	Заказать
Кольцо BHO-45 29/64" ОПМ 108002	1 шт.	43.66 р. много	-+	В корзину
Кольцо BHO-50 1/2" ОПМ 108002	1 шт.	289.98 р. под заказ	-+	В корзину
Кольцо BHO-56 9/16" ОПМ 108002	1 шт.	71.34 р. много	-+	В корзину

Показывать товаров

Пред. | 1 | След.

Если у товара указана цена равная 1 рублю - уточняйте стоимость у менеджера, в счете будет указана откорректированная цена.

Все цены, представленные на сайте, носят справочный характер. Уточняйте информацию у менеджеров.

ОПМ 108002 Кольцо стопорное BHO эксцентрическое осевое внутреннее (дюймовое)

RING NO.	HOUSING DIAMETER			GR(		JOVE SIZE			RING SIZE & WEIGHT							CLEAR.DIA.		i THRUST LD. (lbs.) Sqr. Corner Abulmenl
				DIAMETER		WIDTH		DEPTH	FREE DIAMETER		THICKNESS***		BOW HEIGHT		Weiqhl Per 1D0D Pcs.	Com- pressed in housing	Re- leased in groove	i THRUST LD. (lbs.) Sqr. Corner Abulmenl
																		Ring Safety factor of 4	Groove Safety factor of 2
	Dh DEC	Dh FRACT	Dh mm															Ring Safety factor of 4	Groove Safety factor of 2
	Dh DEC	Dh FRACT	Dh mm	Dq	Tol.	W	Tol.	d	Df	Tol.	T	Tol.	Bh	Tol.	lbs.	LI	L2	Pr	Pg
BH0-25	.250	1/4	6.4	.268	±.001 .0015*	.030	+.002 -.000	.009	.280	±.010	.015	±.002	.036	±.006	.08	.115	.133	426	190
BHO-31	.312	5/16	7.9	.330	±.001 .0015*	.030	+.002 -.000	.009	.346		.015		.036		.11	.173	.191	538	240
BH0-37	.375	3/8	9.5	.397	±.002 .002*	.040	+.00J -.000	.011	.415		.025		.047		.25	.204	.226	1066	350
BH0-43	.438	7/16	11.1	.461		.040		.012	.482		.025		.047		.37	.23	.254	1238	440
BHO-45	.453	29/64	11.5	.477		.040		.012	.498		.025		.047		.43	.25	.274	1299	460
BHO-50	.500	1/2	12.июл	.530	±.002 .004*	.055		.015	.548		.035		.063	±.007	.70	.26	.29	2010	510
BHO-51	.512	-	13.0	.542		.055		.015	.560		.035		.063		.77	.27	.30	2060	520
BHO-56	.562	9/16	14.3	.596		.055		.017	.620		.035		.063		.86	.275	.305	2253	710
BH0-B2	.625	5/8	15 9	.665		.055		.020	.694		.035		.063		.10	.34	.38	2507	1050
BHO-68	.688	11/16	17.5	.732		.055		.022	.763		.035		.063		1.2	.40	.44	2741	1200
BHD-75	.750	3/4	10.0	.796		.055		.023	.831		.035		.063		1.3	.45	.49	3045	1460
BHD-77	.777	-	13.7	.825	±.003 .004*	.062		.024	.859		.042		.073	±.008	1.7	.475	.52	4618	1580
BHO-81	.812	13/16	20.6	.862		.062		.025	.901	±.015	.042		.073		1.9	.49	.54	4872	1710
BHO-86	.866	-	22.0	.920		.062		.027	.961		.042		.073		2.0	.54	.59	5177	1980
BHO-87	.875	7/3	22.2	.931		.062		.028	.971		.042		.073		2.1	.545	.60	5227	2080
BHO-SO	.901	-	22.9	.959		.062		.029	1.000		.042		.073		2.2	.555	.62	5430	2200
BHO-93	.938	15/16	23.8	1.000		.062		.031	1.041		.042		.073		2.4	.61	.67	5684	2450
В H 0-1 CO	1.000	1	25.4	1.066		.062		.033	1.111		.042		.073		2.7	.665	.73	6039	2800
В H 0-102	1.023	-	26.0	1.091		.062		.034	1.136		.042		.073		2.8	.69	.755	6141	3000
BHO-10G	1.062	1-1/16	27.0	1.130	±.004 .005*	.070		.034	1.180	±.025	.050		.085	±.012	3.7	.685	.75	7562	3050
BHO-112	1.125	1-1/8	28.6	1.197		.070		.036	1.249		.050		.085		4.0	.745	.815	8019	3400
BHO-118	1.181	-	30.0	1.255		.070		.037	1.319		.050		.085		4.3	.79	.86	8526	3700
BHO-118	1.138	1-3/16	30.2	1.262		.070		.037	1.319		.050		.085		4.3	.80	.87	8526	3700
BHO-125	1.250	1-1/4	31.7	1.330		.070		.040	1.388		.050		.085		4.8	.875	.955	8932	4250
BHO-125	1.259	-	32.0	1.339		.070		.040	1.388		.050		.085		4.8	.885	.965	8932	4250
BHO-131	1.312	1-5/16	33.3	1.396		.070		.042	1.456		.050		.085		5.0	.93	1.01	9440	4700
BHO-137	1.375	1-3/8	34.9	1.461		.070		.043	1.526		.050		.085		5.1	.99	1.07	9846	5050
BHO-137	1.378	-	35.0	1.464		.070		.043	1.526		.050		.085		5.1	.99	1.07	9846	5050
В H 0-143	1.438	1-7/16	36.5	1.528		.070		.045	1.596		.050		.085		5.8	1.06	1.15	10353	5500
BHO-145	1.456	-	37.0	1.543		.070		.046	1.616		.050		.085		6.4	1.08	1.17	10455	5700
BHO-150	1.500	1-1/2	38.1	1.594		.070		.047	1.660		.050		.085		6.5	1.12	1.21	10708	6000
BHD-156	1.562	1-9/16	39.7	1.658	±.005 .005*	.100	+.005 -.000	.048	1.734	+ .035 -.025	.062	±.003	.115	±.015	8.9	1.14	1.23	13906	6350
BHO 156	1.575	-	40.0	1.671		.100		.048	1.734		.062		.115		8.9	1.15	1.24	13906	6350
BHD-162	1.625	1-5/8	41.3	1.725		.100		.050	1.804		.062		.115		10.0	1.15	1.25	14413	6900
BHO-175	1.750	1-3/4	44.4	1.858		.100		.054	1.942		.062		.115		10.3	1.26	1.36	15580	8050

HARDNESS RANGES: STAINLESS STEEL RINGS (PH 15-7M0)

RING TYPE	SIZE RANGE	SCALE	ROCKWELL HARDNESS
BHO	25&31	15N	82.5-86
	37-102	30 N	63-69.5
	106 +	С	44-51

RIMG NO.	DISTANCE Outer groove wall to lace of retained part		TAKE UP Resilient lake up of tolerances of A&B	FORCE Needed to llatlen rings	ALLOWABLE CORNER RADII & CHAMFERS		MAX LOAD W R max or Ch max (In lbs.)	EDGE MAR- GIN	LUG HEIGHT		MAXIMUM SECTION		MINIMUM SECTION		HOLE DIAMETER		GAP WIDTH Rinq in groove




			J max- J min
	J min	J max	J max- J min	lbs.	R max	Ch max	P'r	Y	H	Tol.	S max	Tol.	S min	Tol.	R	Tol.	G min.
BHO-25	.020	.028	.008	20	.011	.0085	190	.027	.065	±.003	.025	±.002	.015	±.002	.031	+ .010 -.002	.047
BHO-31	.020	.028		20	.016	.013	190	.027	.066		.033	±.002	.018	±.002	.031		.055
BHO-37	.030	.038		45	.023	.018	530	.033	.082		.040	±.003	.028	±.003	.041		.063
BHO-43	.030	.038		40	.027	.021	530	.036	.098		.049		.029		.041		.063
BHO-45	.030	.038		40	.027	.021	530	.036	.098		.050		.030		.047		.071
BHO-50	.042	.053	.011	120	.027	.021	1100	.045	.114		.053	±004	.035	±.004	.047		.090
BHO-51	.042	.053		115	.027	.021	1100	.045	.114	±.005	.053		.035		.047		.092
BHO-56	.042	.053		100	.027	.021	1100	.051	.132		.053		.035		.047		.095
BH0-S2	.042	.053		85	.027	.021	1100	0.06	.132		0.06		0.035		.062		0.104
BH0-6B	.042	.053		65	.027	.021	1100	.066	.132		.063		.036		.062		.118
BHO-75	.042	.053		45	.032	.025	1100	.069	.142		.070		.040		.062		.143
BHO-77	.049	.060		B0	.035	.028	1650	.072	.146		0.074	±.005	.044	±.005	.062		.145
BHO-31	.049	.060		75	.035	.028	1650	.075	.155		0.077		.044		.062		.153
BHO-86	.049	.060		70	.035	.028	1650	.081	.155		0.081		.045		.062		.172
BHO-87	.049	.060		70	.035	.028	1650	.084	.155		0.084		.045		.062		.179
В H 0-90	.049	.060		65	.038	.030	1650	.087	.155		0.087		.047		.062		.188
BHO-93	.049	.060		50	.038	.030	1650	.093	.155		0.091		.050		.062		.200
В H 0-100	.049	.060		55	.042	.034	1650	.099	.155		0.104		.052		.062		.212
В H 0-102	.049	.060		50	.042	.034	1650	.102	.155		0.106		.054		.062		.220
BHO-106	.057	.068		70	.044	.035	2400	.102	.180		0.11	±.006	.055	±.006	.078	+ .015 -.002	.213
BHO-112	.057	.068		65	.047	.036	2400	.108	.180		0.116		.057		.078		.232
BHO-118	.057	.068		60	.047	.036	2400	.111	.180		0.12		.058		.078		.226
BHO-118	.057	.068		60	.047	.036	2400	.111	.180		0.12		.058		.078		.245
BHO-125	.057	.068		55	.048	.038	2400	.120	.180		0.124		.062		.078		.265
BHO-125	.057	.068		55	.048	.038	2400	.120	.180		0.124		.062		.078		.290
BHO-131	.057	.068		50	.048	.038	2400	.126	.180		0.13		.062		.078		.284
BHO-137	.057	.068		45	.048	.038	2400	.129	.180		0.13		.063		.078		.297
BHO-137	.057	.068		45	.048	.038	2400	.129	.180		0.13		.063		.078		.305
BHO-143	.057	.068		40	.048	.038	2400	.135	.130		0.133		.065		.078		.313
BHO-145	.057	.068		35	.048	.038	2400	.138	.180		0.133		.065		.078		.320
BHO-150	.057	.068		35	.048	.038	2400	.141	.180		0.133		.066		.078		.340
BHO-156	.075	.095	.020	40	.064	.050	3900	.144	.202		.157	±.007	.078	±.007	.078		.338
BHO 156	.075	.095		40	.064	.050	3900	.144	.202		.157		.078		.078		.374
BHO-162	.075	.095		40	.064	.050	3900	.150	.227		.164		.082		.078		.339
BHO-175	.075	.095		35	.064	.050	3900	.162	.234		.171		.083		.078		.372

HARDNESS RANGES: CARBON STEEL RINGS (SAE 1060-1090)

RING TYPE	SIZE RANGE	SCALE	ROCKWELL HARDNESS
BHO	25&31	15N	86-88
	37-51	30 N	69.5-73
	56-77	30 N	67.5-72
	81-102	30 N	66-71
	106 +	С	47-52

HARDNESS RANGES: BERYLLIUM COPPER RINGS

RING TYPE	SIZE RANGE	SCALE	ROCKWELL HARDNESS
BHO	25&31	15N	77-82
	37-102	30N	54-62
	106+	С	34-43

ОПМ 108002 Кольцо стопорное BHO эксцентрическое осевое внутреннее (дюймовое)

Товар добавлен в корзину

Вы подписались на товар