ОПМ 108012 Кольцо стопорное MHO эксцентрическое осевое внутреннее

Характеристики

Материал: 1.4532

Покрытие: без покрытия

Материал

Покрытие

Диаметр

Название	В упаковке	Цена	Количество	Заказать
Кольцо стопорное MHO-12 1.4532 ОПМ 108012	1000 шт.	Запросить цену	-+	В корзину

Показывать товаров

Пред. | 1 | След.

Если у товара указана цена равная 1 рублю - уточняйте стоимость у менеджера, в счете будет указана откорректированная цена.

Все цены, представленные на сайте, носят справочный характер. Уточняйте информацию у менеджеров.

ОПМ 108012 Кольцо стопорное MHO эксцентрическое осевое внутреннее

RING NO.	HOUSING DIAMETER		GROOVE SIZE						RING SIZE & WEIGHT					CLEARANCE DIA.		1 THRUST LD (kN) Sqr. corner abutment
			DIAMETER			WIDTH		DEPTH	FREE DIAMETER		THICKNESS***		Wl. Per 1000 pcs.	Com- pressed in housing	Re- leased in Groove	1 THRUST LD (kN) Sqr. corner abutment
																Ring (Safely Factor of 4)	Groove (Safely Factor ol 2)
	Ds mm	Ds INCH														Ring (Safely Factor of 4)	Groove (Safely Factor ol 2)
	Ds mm	Ds INCH	Dq	to I	F.I.M.*	W	to I	d	Df	to I	T	tol	kq	L1	L2	Pr	P5
MHO-8	8	0.315	8.40	+ 0.06	0.03	0.50	+ 0.10	0.20	8.80	+ 0.25 -013	0.4	±0.06	0.05	4.4	4.8	2.4	1.0
MHO-9	9	0.354	9.45	+ 0.06	0.03	0.70	+ 0.15	0.23	10.00		0.6		0.11	4.6	5.0	4.4	1.2
МНО-Ю	10	0.393	10.50	+ 0.10	0.03	0.70		0.25	11.10		0.6		0.14	5.5	6.0	4.9	1.5
MHO-11	11	0.433	11.60		0.05	0.70		0.30	12.20		0.6		0.17	5.7	6.3	5.4	2.0
MHO-12	12	0.472	12.65		0.05	0.70		0.33	13.30		0.6		0.19	6.7	7.3	5.8	2.4
MHO-13	13	0.512	13.70		0.05	1.00		0.35	14.25		0.9		0.35	6.8	7.5	8.9	2.6
MHO-14	14	0.551	14.80		0.05	1.00		0.40	15.45		0.9		0.39	6.9	7.7	9.7	3.2
MHO-15	15	0.591	15.85		0.05	1.00		0.43	16.60		0.9		0.42	7.9	8.7	10.4	3.7
MHO-16	16	0.630	16.90		0.10	1.00		0.45	17.70		0.9		0.47	9.8	9.7	11.0	4.2
MHO-17	17	0.669	18.00		0.10	1.00		0.50	18.90		0.9		0.52	9.8	10.8	11.7	4.9
mho-13	18	0.708	19.05		0.10	1.00		0.53	20.05		0.9		0.58	10.3	11.3	12.3	5.5
MHO-19	13	0.748	20.10	+ 0.15	0.10	1.00		0.55	21.10		0.9		0.59	11.4	12.5	13.1	6.0
MHO-ZO	20	0.787	21.15		0.10	1.00		0.57	22.25		0.9		0.70	11.6	12.7	13.7	6.6
MHO-21	21	0.826	22.20		0.10	1.00		0.60	23.30	+ 0.40 -0.25	0.9		0.82	12.6	13.8	14.5	7.3
MHO-22	22	0.866	23.30		0.10	1.20		0.65	24.40		1.1		0.90	13.5	14.8	22.5	8.3
MHO-23	23	0.905	24.35		0.10	1.20		0.67	25.45		1.1		1.00	14.5	15.9	23.5	8.9
MHO-24	24	0.945	25.40		0.10	1.20		0.70	26.55		1.1		1.09	15.5	16.9	24.8	9.7
MHO-25	25	0.934	26.60		0.10	1.20		0.80	27.75		1.1		1.26	16.5	18.1	25.7	11.6
MHO-26	26	1.023	27.70		0.15	1.20		0.85	28.85		1.1		1.3	17.5	19.2	26.8	12.7
MHO-27	27	1.063	28.80		0.15	1.40		0.90	29.95	+ 0.65 -0.50	1.3		1.7	17.4	19.2	33.0	14.0
MHO-26	28	1.102	29.80		0.15	1.40		0.90	31.10		1.3		1.8	18.2	20.0	34.0	14.6
МНО-9О	30	1.181	31.90	+ 0.20	0.15	1.40		0.95	33.40		1.3		2.0	20.0	21.9	37.0	16.5
MHO-32	32	1.260	33.90		0.15	1.40		0.95	35.35		1.3		2.2	22.0	23.9	39.0	17.6
MHO-34	34	1.339	36.10		0.15	1.40		1.05	37.75		1.3		2.3	24.0	26.1	42.0	20.6
MHO-35	35	1.378	37.20		0.15	1.40		1.10	38.75		1.3		2.3	25.0	27.2	43.0	22.3
MHO-36	36	1.417	38.30		0.15	1.40		1.15	40.00		1.3		2.6	26.0	28.3	44.0	23.9
MHO-37	37	1.457	39.30		0.15	1.40		1.15	41.05		1.3		2.9	27.0	29.3	45.0	24.6
MHO-36	38	1.496	40.40		0.15	1.40		1.20	42.15		1.3		3.0	28.0	30.4	46.0	26.4

RING NO.	LUG HEIGHT	MAXIMUM SECTION	MINIMUM SECTION	HOLE DIAMETER	GAP WIDTH Ring in Groove	ALLOWABLE CORNER RADII & CHAMFERS		MAX. LOAD vi/ R max or Ch max	EDGE MARGIN
RING NO.	H nom	S max/Ref	S minflef.	R min	G	Rmax	Ch max	P’r	Y
MHO-8	1.7	0.85	0.45	0.8	1.40	0.4	0.3	0.8	0.6
MHO-9	2.1	1.25	0.65	1.0	1.50	0.5	0.35	2.0	0.7
МНО-Ю	2.1	1.30	0.70	1.0	1.85	0.5	0.35	2.0	0.8
MHO-11	2.5	1.30	0.70	1.0	1.95	0.6	0.4	2.0	0.9
MHO-12	2.5	1.35	0.75	1.0	2.25	0.6	0.4	2.0	1
MHO-13	2.9	1.35	0.90	1.2	2.35	0.7	0.5	4.0	1.1
MHO-14	3.3	1.60	0.90	1.2	2.65	0.7	0.5	4.0	1.2
MHO-15	3.3	1.65	0.95	1.5	2.80	0.7	0.5	4.0	1.3
MHO-16	3.4	1.70	0.95	1.5	2.80	0.7	0.5	4.0	1.4
MHO-17	3.4	1.70	D.95	1.5	3.35	0.75	0.6	4.0	1-5
mho-13	3.6	1.80	1.00	1.5	3.40	0.75	0.6	4.0	1.6
MHO-19	3.6	1.80	1.00	1.5	3.40	0.8	0.65	4.0	1.7
MHO-ZO	4.0	2.00	1.10	1.5	3.80	0.9	0.7	4.0	1.7
MHO-21	4.0	2.10	1.20	1.5	4.20	0.9	0.7	4.0	1.8
MHO-22	4.0	2.10	1.20	1.5	4.30	0.9	0.7	7.4	1.3
MHO-23	4.0	2.20	1.20	1.5	4.90	1.0	0.8	7.4	2.0
MHO-24	4.0	2.30	1.30	1.5	5.20	1.0	0.8	7.4	2.1
MHO-25	4.0	2.60	1.30	1.5	6.00	1.0	0.8	7.4	2.4
MHO-26	4.0	2.70	1.40	1.5	5.70	1.2	1.0	7.4	2.6
MHO-27	4.6	2.80	1.40	1.9	5.90	1.2	1.0	10.8	2.7
MHO-28	4.6	2.90	1.50	1.9	6.00	1.2	1.0	10.8	2.7
МНО-9О	4.6	3.00	1.50	1.9	6.00	1.2	1.0	10.8	2.9
MHO-32	4.6	3.10	1.60	1.9	7.30	1.2	1.0	10.8	2.9
MHO-34	4.6	3.20	1.60	1.9	7.60	1.2	1.0	10.8	3.2
MHO-35	4.6	3.30	1.60	1.9	8.00	1.2	1.0	10.8	3.3
MHO-36	4.6	3.40	1.70	1.9	8.30	1.2	1.0	10.8	3.5
MHO-37	4.6	3.40	1.70	1.9	8.40	1.2	1.0	10.8	3.5
MHO-38	4.6	3.40	1.70	1.9	8.60	1.2	1.0	10.8	3.6

RING NO.	HOUSING DIAMETER		GROOVE SIZE						RING SIZE & WEIGHT					CLEARANCE DIA.		i THRUST LD (kN) Sqr. corner abutment
			DIAMETER			WIDTH		DEPTH	FREE DIAMETER		THICKNESS***		Wt. Per 1000 pcs.	Com- pressed in housing	Re- leased in Groove	i THRUST LD (kN) Sqr. corner abutment
																Ring (Safety Factor of 4)	Groove (Safety Factor of 2)

	Ds mm	Ds INCH
	Ds mm	Ds INCH	Dq	lol	F.I.M.*	W	lol	d	Df	lol	T	to I	kq	L1	L2	Pr	Pg
MHO-40	40	1.575	42.40	+ 0.20	0.15	1.75	+ 0.20	1.20	44.25	+ 0.90 -0.65	1.6	±0.08	4.0	29.2	31.6	62.0	27.7
MHO-42	42	1.654	44.50		0.15	1.75		1.25	46.60		1.6		4.7	29.7	32.2	65.0	30.2
MHO-45	45	1.772	47.60		0.15	1.75		1.30	49.95		1.6		5.1	32.3	34.9	69.0	33.8
MHO-46	46	1.811	48.70		0.20	1.75		1.35	51.05		1.6		5.2	33.3	36.0	71.0	36.0
MHO-47	47	1.850	49.80		0.20	1.75		1.40	52.15		1.6		5.8	34.3	37.1	72.0	38.0
MHO-48	48	1.890	50.90		0.20	1.75		1.45	53.30		1.6		6.1	35.0	37.9	74.0	40.0
MHO-50	50	1.969	53.10		0.20	1.75		1.55	55.35		1.6		6.2	36.9	40.0	77.0	45.0
MHO-52	52	2.047	55.30	+ 0.30	0.20	2.15	+ 0.20	1.65	57.90	+ 1.00 -0.75	2.0		3.1	33.6	41.9	99.0	50
MHO-55	55	2.165	58.40		0.20	2.15		1.70	61.10		2.0		3.9	40.8	44.2	105.0	54.0
MHO-57	57	2.244	60.50		0.20	2.15		1.75	63.25		2.0		9.9	42.2	45.7	109.0	58.0
MHO-58	58	2.283	61.60		0.20	2.15		1.80	64.40		2.0		10.1	43.2	46.8	111.0	60.0
MH0-60	60	2.362	63.80		0.20	2.15		1.90	66.80		2.0		10.5	45.5	49.3	115.0	66.0
MHO-62	62	2.441	65.80		0.20	2.15		1.90	68.60		2.0		11.5	47.0	50.8	119.0	68.0
MHO-53	63	2.480	66.90		0.20	2.15		1.95	69.90		2.0		11.6	47.8	51.7	120.0	71.0
MHO-65	65	2.559	69.00		0.20	2.55		2.00	72.20		2.4		15.4	49.4	53.4	149.0	75.0
MHQ-68	68	2.677	72.20		0.20	2.55		2.10	75.70		2.4		15.9	52.0	55.2	156.0	82.0
MHQ-70	70	2.756	74.40		0.20	2.55		2.20	77.50		2.4		16.1	53.8	58.2	161.0	88.0
MHO-72	72	2.335	76.50		0.20	2.55		2.25	79.60		2.4		16.3	55.9	60.4	166.0	93.0
MHO-75	75	2.953	79.70		0.20	2.55		2.35	83.30		2.4		19.3	58.2	62.9	172.0	101.0
MHO-78	78	3.071	82.80		0.20	2.95		2.40	86.80	+ 1.40 -1.40	2.6		24.0	61.2	66.0	209.0	108.0
MHO-SO	80	3.150	85.00		0.20	2.95		2.50	89.10		2.6		25.9	63.0	68.0	215.0	115.0
MHO-82	82	3.228	87.20		0.25	2.95		2.60	91.10		2.8		27.2	63.5	68.7	220.0	122.0
MHO-85	85	3.346	90.40		0.25	2.95		2.70	94.40		2.8		29.5	66.8	72.2	228.0	131.0
MHO-88	88	3.464	93.60		0.25	2.95		2.80	97.90		2.8		31.3	69.6	75.2	236.0	141.0
MHO-90	90	3.543	95.70		0.25	2.95		2.85	100.00		2.8		32.6	71.6	77.3	241.0	147.0
MHO-92	92	3.622	97.80		0.25	2.95		2.90	102 20		2.8		33.1	73.6	79.4	247.0	153.0

RING NO.	LUG HEIGHT	MAXIMUM SECTION	MINIMUM SECTION	HOLE DIAMETER	GAP WIDTH Ring in Groove	ALLOWABLE CORNER RADII & CHAMFERS		MAX. LOAD w/ R max or Ch max	EDGE MARGIN
RING NO.	H nom	S max/Ref.	S min/Ref.	Rmin	G	Rmax	Ch max	Pr	Y
MHO-40	5.1	4.00	2.00	1.9	9.70	1.7	1.3	17.4	3.6
MHO-42	5.8	4.20	2.10	1.9	9.00	1.7	1.3	17.4	3.7
MHO-45	6.0	4.30	2.10	1.9	9.60	1.7	1.3	17.4	3.9
MHO-46	6.0	4.30	2.10	2.3	9.70	1.7	1.3	17.4	4.0
MHO-47	6.0	4.30	2.20	2.3	10.00	1.7	1.3	17.4	4.2
MHQ-48	6.0	4.50	2.30	2.3	10.50	1.7	1.3	17.4	4.3
MHO-51)	6.0	4.60	2.30	2.3	12.10	1.7	1.3	17.4	4.6
MHO-52	6.4	4.70	2.30	2.3	11.70	2.0	1.6	27.4	5.0
MHO-55	6.7	5.1	2.50	2.3	11.90	2.0	1.6	27.4	5.1
MHO-57	6.9	5.20	2.50	2.3	12.50	2.0	1.6	27.4	5.3
MHO-58	6.9	5.30	2.60	2.3	13.00	2.0	1.6	27.4	5.4
MHO-50	6.9	5.30	2.60	2.3	12.70	2.0	1.6	27.4	5.7
MHO-52	7.1	5.30	2.60	2.7	14.00	2.0	1.6	27.4	5.7
MHO-53	7.1	5.40	2.70	2.7	14.20	2.0	1.6	27.4	5.9
MHO-55	7.4	5.60	2.80	2.7	14.20	2.0	1.6	42.0	6.0
MHO-53	7.6	5.80	2.90	2.7	14.40	2.3	1.8	39.0	6.3
MHO-70	7.6	5.80	2.90	2.7	16.10	2.3	1.8	39.0	6.6
MHO-72	7.6	5.80	2.90	2.7	17.40	2.3	1.8	39.0	6.7
MHO-75	7.9	6.20	3.10	2.7	16.80	2.3	1.8	54.0	Г.1
MHO-78	7.9	6.50	3.20	3.1	17.60	2.5	2.0	54.0	7.2
MHO-SO	7.9	6.70	3.30	3.1	17.20	2.5	2.0	54.0	7.5
MH0-S2	8.7	6.90	3.40	3.1	18.80	2.6	2.1	54.0	7.8
MHO-85	8.7	7.00	3.60	3.1	19.10	2.6	2.1	54.0	8.1
MHO-88	8.7	7.30	3.60	3.1	20.40	2.8	2.2	54.0	8.4
MHO-90	8.7	7.40	3.60	3.1	21.40	2.8	2.2	54.0	8.6
MHO-92	8.7	7.60	3.30	3.1	22.20	2.9	2.4	54.0	8.7

RING NO.	HOUSING DIAMETER		GROOVE SIZE						RING SIZE & WEIGHT					CLEARANCE DIA.		t THRUST LD (kN) Sqr. corner abutment
			DIAMETER			WIDTH		DEPTH	FREE DIAMETER		THICKNESS***		Wt. Per 1000 pcs.	Com- pressed in housing	Re- leased in Groove	t THRUST LD (kN) Sqr. corner abutment
																Ring (Safety Factor Df 4)	Groove (Safety Factor of 2)

	Ds mm	Ds INCH
	Ds mm	Ds INCH	Dg	tol	F.I.M.¹	w	lol	d	D<	tol	T	tol	kq	L1	L2	Pr	pg
MHO-95	95	3.740	101.00	+ 0.30	0.25	2.95	+ 0.20	3.00	105.60	+ 1.65 -1.65	2.8	±0.08	35.4	76.7	82.7	255.0	164.0
MHO-98	98	3.858	104.20	+ 0.30	0.25	2.95		3.10	109.00		2.8		39.4	78.3	84.5	263.0	174.0
MHO-100	100	3.937	106.30	+ 0.40	0.25	2.95		3.15	110.70		2.8		39.9	80.3	86.6	269.0	181.0
MHQ-102	102	4.016	108.40		0.25	2.95		3.20	112.40		2.8		42.2	82.2	88.6	273.0	187.0
MHQ-105	105	4.134	111.50		0.25	2.95		3.25	115.80		2.8		44.0	85.1	91.5	281.0	196.0
MHQ-108	108	4.252	114.60		0.25	2.95		3.30	119.20		2.8		45.8	88.1	94.7	290.0	205.0
MHO-11 D	110	4.331	116.70		0.25	2.95		3.35	120.80		2.8		47.6	88.4	95.1	295	212.0
MHO-115	115	4.528	121.90		0.25	2.95		3.45	126.00		2.3		50.3	93.2	100.1	309.0	227
MHO-120	120	4.724	127.00		0.25	2.95		3.50	132.40		2.3		56.2	98.2	105.2	321.0	241.0
MHO-125	125	4.921	132.10		0.25	2.95		3.55	137.10		2.8		60.0	103.1	110.2	335	255.0
MHO-130	130	5.118	137.20		0.25	2.95		3.60	142.50		2.8		63.5	103.0	115.2	349.0	269.0
MHO-135	135	5.315	142.30		0.25	3.40	+ 0.25	3.65	148.50		3.2	±0.10	79	110.4	117.7	415.0	283.0
MH0-140	140	5.512	147.40		0.25	3.40		3.70	154.10		3.2		83	115.3	122.7	429.0	298.0
MHO-145	145	5.709	152.50		0.25	3.40		3.75	159.50		3.2		87	120.4	127.9	444.0	313.0
MHO-150	150	5.906	157.60		0.25	3.40		3.80	164.50		3.2		89	125.3	132.9	460.0	327.0
MHO-155	155	6.102	162.70		0.30	3.40		3.85	168.80		3.2		91	130.4	138.1	475.0	343.0
MHO-160	160	6.299	167.30		0.30	4.25		3.90	175.10	+ 2.05 -2.05	4.0	±0.12	121	133.8	141.6	613.0	359.0
MHO-165	165	6.496	172.90	+ 0.50	0.30	4.25		3.95	180.30		4.0		127	1387	146.6	632.0	374.0
MH0-170	170	6.693	178.00		0.30	4.25		4.00	185.60		4.0		138	143.6	151.6	651.0	390.0
MHO-175	175	6.890	183.20		0.30	4.25		4.10	191.30		4.0		147	146.0	154.2	670.0	403.0
MHO-180	180	7.087	188.40		0.30	4.25		4.20	196.60		4.0		156	151.4	159.8	690.0	434.0
MHO-165	185	7.283	193.60		0.30	5.10		4.30	202.70	+ 2.30 -2.30	4.8		194	154.7	163.3	851.0	457.0
MHO-190	190	7.480	198.80		0.30	5.10		4.40	207.70		4.8		220	159.5	168.3	873.0	480.0
MHO-200	200	7.874	209.00		0.30	5.10		4.50	217.80		4.8		235	169.2	178.2	919.0	517.0
MHO-210	210	8.268	219.40		0.30	5.10		4.70	230.30		4.8		275	177.5	186.9	965.0	566.0
MH0-22D	220	8.661	230.00		0.30	5.10		5.00	240.50		4.8		285	184.1	194.1	1000.0	608.0
MHQ-230	230	9.055	240.60		0.30	5.10		5.30	251.40		4.8		330	194.0	204.6	1060.0	686.0
MH0-24D	240	9.449	251.00		0.30	5.10		5.50	262.30		4.8		365	200.4	211.4	1090.0	725.0
MH0-250	250	9.843	261.40		0.30	5.10		5.70	273.30		4.8		375	210	221.4	1150.0	808.0

RING NO.	LUG HEIGHT	MAXIMUM SECTION	MINIMUM SECTION	HOLE DIAMETER	GAP WIDTH Ring in Groove	ALLOWABLE CORNER RADII & CHAMFERS		MAX. LOAD w/ R max or Ch max	EDGE MARGIN
RING NO.	H nom	S max/Ref.	S min/Ref.	R min	G	R max	Ch max	PT	Y
MHO-95	8.7	7.80	3.90	3.1	22.60	3.0	2.5	54.0	9.0
MHO-98	9.4	8.10	4.10	3.1	22.60	3.0	2.5	54.0	9.3
MHQ-100	9.4	8.20	4.10	3.1	24.10	3.1	2.5	54.0	9.5
MHQ-102	9.4	8.40	4.20	3.1	25.50	3.2	2.6	54.0	9.6
MHO-105	9.4	8.40	4.30	3.1	26.00	3.3	2.6	54.0	9.8
MHQ-108	9.4	8.50	4.60	3.1	26.40	3.5	2.7	54.0	9.9
MHO-11 D	10.3	8.70	4.60	3.8	27.50	3.6	2.8	54.0	10.1
MHO-115	10.3	8.90	4.60	3.8	29.40	3.7	2.9	54.0	10.4
MH0-120	10-3	9-40	4.60	3.8	27.20	3.9	3.1	54.0	10.5
MHO-125	10.3	9.50	4.70	3.0	30.30	4.0	3.2	54.0	10.7
MHO-130	10.3	9.80	4.90	3.8	31.00	4.0	3.2	54.0	10.8
MHO-135	11.6	10.40	5.00	3.8	30.40	4.3	3.4	67.0	11.0
MH0-140	11.6	10.40	5.00	3.8	30.40	4.3	3.4	67.0	11.1
MHO-145	11.6	10.60	5.30	3.8	31.60	4.3	3.4	67.0	11.3
MH0-15D	11.6	10.80	5.40	3.8	33.50	4.3	3.4	67.0	11.4
MHO-155	11.6	10.80	5.40	3.8	37.00	4.3	3.4	67.0	11.6
MHO-160	12.3	10.90	5.40	4.6	35.00	4.5	3.6	102.0	11.7
MHO-165	12.3	11.10	5.SO	4.6	33.10	4.6	3.7	102.0	11.9
MH0-170	12.3	11.40	5.60	4.6	38.20	4.6	3.7	102.0	12.0
MHO-175	13.5	11.60	5.70	4.6	37.70	4.3	3.8	102.0	12.3
MHO-180	13.5	12.00	5.90	4.6	39.00	5.0	4.0	102.0	12.6
MHO-165	14.2	12.40	6.00	4.6	37.30	5.1	4.1	151.0	12.9
MH0-19D	14.2	12.90	6.30	4.6	35.00	5.3	4.3	151.0	13.2
MHO-ZOO	14.2	13.30	6.50	4.6	43.90	5.4	4.3	151.0	13.5
MHO-21 O'	15.2	14.20	6.90	4.6	40.60	5.8	4.6	151.0	14.1
MH0-22D	16.8	15.00	7.30	4.6	38.30	6.1	4.9	151.0	15.0
MHO-239	16.8	15.50	7.50	4.6	49.00	6.3	5.1	151.0	15.9
MH0-24D	18.7	16.30	7.70	4.6	45.40	6.6	5.3	151.0	16.5
MHO-259	18.7	16.70	7.80	4.6	53.00	6.7	5.4	151.0	17.1

RING TYPE	SIZE RANGE	SCALE	ROCKWELL HARDNESS
MHO	8	15N	82.5-86
	9-26	SON	S3-69.5
	27-250	С	44-51

RING TYPE	SIZE RANGE	SCALE	ROCKWELL HARDNESS
MHO	8	15N	86-88
	9-13	30N	69.5-73
	14-20	30N	SB.5-72
	21-26	30N	67.5-71
	27-250	С	48-52

ОПМ 108012 Кольцо стопорное MHO эксцентрическое осевое внутреннее

Товар добавлен в корзину

Вы подписались на товар